Roll up door balance test is a process to check the stability of the roll up door. This is done for both new and existing roll up doors. The roll up door balance test determines if the door is working properly or not. It also helps in identifying any problem that may occur in future.

The main purpose of roll up door balance test is to find out whether there is any problem with the roll up door or not. You can easily check this by yourself without going to a roll up door parts supplier. If you are looking for a DIY solution then this is the right place for you.

How to Perform a Roll Up Door Balance Test

The balance test ensures that the lift mechanism and counterweight are properly adjusted so that they work together to keep your doors level.

When a door is out of balance, it will tilt or swing from side-to-side when opened. This can cause damage to the equipment and can even cause injury if an employee gets caught in the door as it swings open or closed.

Here’s how to perform the balance test on your roll -up door:

Step 1: Check your door frame

Check the frame and make sure there are no cracks or broken pieces. If there are any cracks or broken pieces, you will need to replace them before performing any other tests.

Step 2: Check the weather sealant

If you have a weather sealant around the edges of your door frame, make sure it is not cracked or peeling off. If it is cracked or peeling off, you will need to replace it before performing any other tests.

Step 3: Check the rollers

Roller wheels are typically made out of urethane or steel and they should be able to turn freely without any stiffness in their movement. If they do feel stiff when turning them by hand, then they may need some lubrication or replacement as soon as possible so that they don’t cause problems with your door’s performance later on down the line (like when it comes time for another inspection).

What to Consider When Performing the Balance Test

When performing a roll up door balance test, it is important to consider the following:

  1. Ensure that the door is fully closed and locked.
  2. Check that the door’s hinges are tight.
  3. Check that the latching mechanism on each side of the door is working properly (there should be no gap between the top and bottom of the frame).
  4. Check that there is no dirt or debris in between the rollers and tracks which could be causing friction or getting stuck. If there is dirt or debris, use compressed air to clean out all tracks and rollers thoroughly before proceeding with your test.
  5. Ensure that you have someone standing by at all times during this procedure just in case something goes wrong and they need to help you safely open the door again once the balancing has been completed.


The door balance test is very safe and effective in measuring the function of a roll-up door. The balance test should be done about once per month for normal inspections. It is also suggested that if you notice an issue with the roll-up door, performing a balance test will confirm whether it’s an isolated incident or a larger problem that needs to be addressed.

Many times, the door balances perfectly on its own…but when locked, the door opens! It is quite possible that the lock was improperly adjusted. If this is the case, then the owner of the garage will need to make adjustments. Hopefully, though, you won’t need to try any of these tricks out because you already are able to avoid this problem in advance. Just use these tips to keep your garage safe and secure so that you don’t have to deal with any of these issues in the future. If you however, feel you need to get a new roll up door, feel free to check out bestardor roll up door parts.


Please enter your comment!
Please enter your name here